https://www.it.onkyo.com/en/irajax/en/articles/firmware-update-pr-sc5509-19-02-2014-59859.html/cHJvamVjdC5jb21tb24udXJsU2hvcnRlbmVyOw==

Firmware Update PR-SC5509 (19-02-2014)

We are pleased to offer this firmware update for the best possible performance of your AV Receiver.

PR-SC5509
(Version 1081-0800-0210-6104)

  • Corrects lock up failure when using Telstra T Box or MiCasaVerde Vera Lite controller on the same network
  • To correspond format changing of Rhapsody, you should apply this update.
    (U.S. Only)

Information Concerning Firmware Update for Onkyo Network Receivers

Onkyo has discovered there is a possibility of failure when updating receivers to this new firmware package via ethernet in certain network environments. For this reason, we are now only releasing a firmware file for installation via USB port / flash memory device.
Should you encounter any difficulties when performing this update, please contact us.
We appreciate your understanding and apologize for any inconvenience this issue may cause.

To check if your firmware is the latest version, go in to Setup -> Hardware Setup -> Firmware Update and check the 16 digit number (XXXX-XXXX-XXXX-XXXX). If any of the numbers differ from the latest version available, please update your unit.

Update via USB storage 

Note: Please remove the wired/wireless connection before updating through USB.
Please prepare a USB storage device such as a USB flash memory stick. You need at least 64 MB of available space to update the firmware. Please unpack the ZIP file onto an empty USB Stick which has been formatted with the FAT file system.
We hope you enjoy the improved functionality this update provides to your AV Receiver.

- The firmware update should take 15 to 40 minutes (depending on receiver model). Once the update begins, don't turn off the power supply to the A/V receiver until it is time to restart it

- Updating the firmware and adjusting the settings will be done automatically, but may take some time to complete. Please follow the procedures as instructed when you update. Note that the update may fail, or cause problems for your A/V receiver, if you do any of the following:

  • Pull out the A/V receiver’s power cord;
  • Interrupt the power supply to the A/V receiver (e.g. if the breaker is tripped or if there is an electrical outage);
  • Insert or remove the LAN cable from a device in your network when updating over a network;
  • Insert or remove a USB memory device from the A/V receiver when updating via USB;
  • Operate components connected to the A/V receiver via HDMI, such as a TV or a recording device.

If your A/V receiver is damaged for any of the reasons above, an Onkyo service center will repair the unit for a fee.

If you see "No Update" on the front panel immediately after you have started the firmware update process, you have the latest firmware. In this case it is not necessary to do this update.

Please note: if there will be an error message or a interruption during the update over Internet, please contact our service partner in your country.

Downloads

Documentation Firmware

RSS News

Termination of Gracenote music recognition service on certain Onkyo products

Dear Valued Customer, We regret to inform you that we will terminate Gracenote music recognition service from the ONKYO… more

Press Release dated: 2 Jul 2019
Premium RZ Series AVRs Get a High-Octane Upgrade with Strengthened Amps and IMAX® Enhanced Certification

ONKYO, JAPAN. Onkyo has added two THX® Certified Select™ and IMAX® Enhanced*1 certified Network A/V Receivers to its… more

Press Release dated: 30 Apr 2019
Onkyo issues Firmware Update for Apple AirPlay 2

OSAKA, JAPAN. Onkyo is pleased to confirm the release of a firmware update that will add Apple AirPlay 2 capabilities to… more

Press Release dated: 18 Apr 2019
Onkyo Unveils A High-Performance THX® Certified Select™ AV Receiver and Flexible 3D Audio-Ready Home Cinema Packages

OSAKA, JAPAN. Onkyo is continuing its mission to make home entertainment more immersive and ever more adaptable with the… more

Press Release dated: 26 Mar 2019
Onkyo Launches Value-Packed AVRs with Dolby Atmos® and DTS:X® for 3D Audio Through Any Speaker Layout

OSAKA, JAPAN. Onkyo presents a persuasive value proposition with two Dolby Atmos and DTS:X enabled A/V receivers, the 5.2-ch… more

Press Release dated: 6 Feb 2019

Current Catalogue

Catalog ONKYO Audio Video Products 2017-2018
Download pdf (51.54 MB)